Filter
Top Products
12
Advanced Operation
You can use the video fader to insert video images manually.
When using this feature, you can use the “PinP” (Picture in Picture) or key composite
effects.
fig.11
1
Pull the video fader all the way toward MAIN.
2
Select the input to insert (1–4).
3
Move the video fader to the INSERT side.
The video images are inserted as you move the fader.
4
Return the fader to the MAIN side to return to the original image.
fig.12
When this is set to “OFF,” composite effects are not
applied. The video is inserted in the entire screen
according to the transition selected with the
TRANSITION TYPE selection buttons (p. 10).
fig.13
When PinP is selected, the Picture in Picture function
goes into effect. A small picture is mixed (faded in),
regardless of the TRANSITION TYPE button setting.
The position of the smaller picture changes according to the MODE setting (upper
right, upper left, lower right, or lower left).
fig.14.e
Inserting Images with the Video Fader
About Insert Effects
If you do not start out with the
video fader completely tilted
to the MAIN side, then the
Insert function will not work,
even when you then move the
video fader. First bring the
fader all the way to MAIN to
start the function.
The insert method varies with
the insert effect.
Switch the insert input before
inserting. Although it is
possible to switch the insert
input while the insert is in
progress, note that this
disrupts synchronization.
MODE: OFF
MODE: PinP
MAIN Image INSERT Image OUTPUT Image
LVS-400_e1.book 12 ページ ２００４年１月２０日 火曜日 午後１２時５０分