Filter
Top Products
professional control surface
Artist Series
USER GUIDESETUP AND INSTALLATION
16
Two larger, detached riser brackets elevate and angle the unit more than the
foldout legs. Use moderate force to snap them into the bottom panel as shown
in Figure 2-1.
To remove the riser brackets:
1. Slide the side panels off (Figure 2-2 left).
Figure 2-2 Removing side panels (left); removing riser brackets
2. Press the tabs to release the riser brackets (Figure 2-2 right).
3. Lift the riser bracket out of the MC Control to remove
2.1.2 Physically Linking Artist Devices
An MC Control can be physically attached to up to four MC Mixes to form a larger,
stable control surface. See Surfaces on page 40 to use EuControl to link the sur-
faces in the desired order.