Filter
Top Products
Defining your own presets
28
To move the listening position to the
left or right
● Press > or < (remote) until the display shows the current
balance.
For example:
Balance <0>
● Press A or V (remote) to move the listening position.
The display shows the direction and position of the listening
position.
For example:
Balance <8
The arrow indicates the direction, and the number indicates the
position where 0 is central, 8 is in line with the corresponding
main speaker, and 10 is fully to one side.
Note that this adjustment is not available for the Mono preset.
A conventional stereo system provides a single balance control,
which changes the relative loudness of the two speakers. The
568 Digital Surround Processor provides a more sophisticated
adjustment which corresponds to moving the listening position
to the left or right.
You can also change the level of the rear or side loudspeakers
relative to the main speakers.
Changing the listening position