Filter
Top Products
Configuring the digital surround processor using a computer
79
Requirements
To use the Meridian Configuration program you need:
❍ A computer running Windows 95 or Windows NT 4.00.
❍ A 100MHz or faster Pentium-class processor.
❍ At least 16 Mbytes of RAM.
❍ 5 Mbytes of free disk space.
❍ A vacant 9-pin serial port assigned to one of COM1 to 4.
The software requires a mouse or similar pointing device – it
cannot be operated solely from the keyboard.
To install the Meridian Configuration
program
● Insert the first Meridian Configuration program installation
disk.
● Choose Run... from the Start menu.
● Type A: setup and press R.
● Follow the on-screen instructions, inserting the second
installation disk when prompted.
Planning the configuration
Before creating a configuration for your 568 Digital Surround
Processor it is a good idea to plan the following aspects of your
setup:
❍ How you are going to set up the different speakers in your
layout.
❍ Whether the bass is going to be handled by the main
speakers, or by one or more subwoofers.
❍ Which analogue or digital inputs you are going to use for each
of your sources.
❍ Which DSP preset you want as the default preset for each
source and audio format.
Installing the Meridian Configuration program