Filter
Top Products
Configuring the digital surround processor without a computer
76
To change the volume
● Use the volume keys in the usual way.
Warning: Very loud low-frequency signals may damage
speakers.
To select the channel
● Press < or > (remote) until the display shows the current
channels.
For example:
All Channels
● Press A or V to select a specific channel, or All Channels.
To select other test signals
● Press < or > (remote) until the display shows the current
signal.
For example:
Signal Sine
● Press A or V to choose between the following test signals:
Display Description
A sinewave.
Signal Sine
Silence
Signal Off
Pink noise (band pass 500Hz to
Signal Noise
2kHz for main channels).