Filter
Top Products
16
VM04 Owner’s manual
0
6
12
24
OL
1234LR1234
MIN
L
R
MAX
48
EQ
PAN
LO
HI
EFF
SCENE NO.
LEVEL
VIEW
CH
MASTER
Flashing
0
6
12
24
OL
1234LR1234
MIN
L
R
MAX
48
EQ
PAN
LO
HI
EFF
SCENE NO.
LEVEL
VIEW
CH
MASTER
LO dot is flashing.A dot moving up and down.
Indicates +1dB ~ +18dB or -1dB ~ -18dB.
0
6
12
24
OL
1234LR1234
MIN
L
R
MAX
48
EQ
PAN
LO
HI
EFF
SCENE NO.
LEVEL
VIEW
CH
MASTER
Flashing
0
6
12
24
OL
1234LR1234
MIN
L
R
MAX
48
EQ
PAN
LO
HI
EFF
SCENE NO.
LEVEL
VIEW
CH
MASTER
6-2. EQ Lo Setting
1.Press the VIEW key so that the LO dot is flashing
on the VIEW Status Indicator.
The LCD Display will show the following message:
Character section
This will display “1-Lo: 0”. This means that you can
now adjust the Channel 1 EQ Lo setting. At this
point the setting is zero, flat.
2.Rotate the DATA ENCODER.
If you turn it clockwise, the display on the Character
section will change to +1dB -> +18dB from 0dB
and the bass sound will become louder. At the same
time, the two dots on the EQ Lo indicator at the
center of the bar-graph will become a single dot
and move upwards (to MAX). Similarly, if you turn
the dial counter-clockwise, the display will show -
1dB -> -18dB, the bass sound will become quieter
and the indicator will move downwards (to MIN).
<Useful info>
The specification of the EQ Lo is the Shelving Type
Equalization and its control frequency is 100Hz, +/-18dB.
6-3. EQ Hi setting
1.Press the VIEW key so that the HI dot is flashing
on the VIEW Status Indicator.
The LCD display will show the following message.
Character section
This will display “1-HI: 0”. This means that you can
now adjust the Channel 1 EQ HI setting. At this
point the setting is zero, flat.
2.Rotate the DATA ENCODER.
If you turn it to clockwise, the display on the
Character part will change to +1dB -> +18dB from
0dB and the treble sound will become louder.
At the same time, two dots of the EQ Hi indicator
at the center of the bar-graph will become a single
dot and move upwards (to MAX). Similarly, if you
turn the dial counter-clockwise, the display will
show -1dB -> -18dB, the treble sound will become
quieter and the indicator will move downwards
(to MIN).
Indicates +1dB ~ +18dB or -1dB ~ -18dB.
LO dot is flashing.A dot moving up and down.
<Useful info>
The specification of the EQ HI is the Shelving Type
Equalization and its control frequency is 100Hz, +/-18dB.