Filter
Top Products
9
■■
Using the CD Player
PROGRAM
Number Keys
RANDOM
REPEAT
CD
6
7
¢
0
CD
4
JOG dial
0
CD
4
7
¢
CD
6
Play mode indicator
Track number, Playing
time, Preset number
Repeat
indicator
Music calender
CD indicator
OVER indicator which lights up if the
number of tracks of the CD exceeds 20.
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
DISPLAY/CHARA.
You can use Normal, Random, Program or Repeat Play. Repeat
Play can repeat all the tracks or just one of the tracks on the CD.
Here are the basic things you need to know to play a CD and locate
the different tracks on it.
The Quickest Way To Start a CD Is With the
One Touch Operation
■
Press the CD
6
button.
• The power is automatically turned on. If a CD is already
inserted, it will start playing from the first track.
• If no CD is inserted, "CD NO DISC" appears on the display
and the CD Player remains in Stop mode.
■
1. Press the 0 CD button on the Unit.
The tray opens.
■
2. Place a CD, with its label side up as shown
below.
■
3. Press the 0 CD button again to close the
tray.
• To close the tray and play the CD, you can press the CD
6
but-
ton.
• When you press the button to turn off the System, the tray will
be automatically closed, if it is open.
■
You can place an 8 cm (3'') CD without an adaptor.
■
If the CD cannot be read correctly (because it is scratched, for
example), " 0 0:00" appears on the display.
■
You can insert a CD while listening to the other source.
To Play a CD—————————————
■
1. Insert a CD.
■
2. Press the CD6 button.
The first track of the CD begins playing.
• The track number that has been played disappears from the
music calender.
• The CD Player automatically stops when the last track of the
CD has finished playing.
To stop playing the CD, press the
7 button.
The following information for the CD is displayed.
To stop playing and remove the CD, press the
0CD button to
open the tray.
To pause, press the CD
6
button. The playback time blinks on
the display.
To cancel pause, press the same button again. Play continues
from the point where it was paused.
Locating a Track with Remote Con-
trol Directly —————————————
During playback or in Stop mode, press the number keys on the Re-
mote Control to directly play a track.
To directly play the track 5, press 5.
To directly play the track 15, press +10 then 5.
To directly play the track 20, press +10 once then press 10.
To Select a Track ——————————
During playback, press the 4 or ¢ button or turn the JOG dial
to select the track you want.
The selected track starts playing.
• Press the
¢ button once or turn the JOG dial to the right by 1
click to skip to the beginning of the next track.
To Insert a CD
Basics of Using the
CD Player-Normal Play
Track number
Playback time
Total track number Total playback time
RD-MD5(B)-e.fm Page 9 Wednesday, December 2, 1998 11:40 AM