Filter
Top Products
4
CAUTION: Make all connections before plugging the System into an AC power outlet.
Connect an (not supplied) signal cord between the AUX IN terminal on the System and the output terminals of your auxiliary equipment (e.g.
turntable). You can listen to this source.
Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!!
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, an MD, or turn on the radio with a single press of the play button for that function. One Touch
Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD in place, for example), the
System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
Connecting Auxiliary Equipment
Connecting the AC Power Cord
COMPU PLAY
On the Unit
CD
6
button
TUNER BAND button
MD
6
button
AUX button
On the Remote Control
CD
6
button
TUNER BAND button
MD
6
button
AUX button
Pin-plug x 2
Stereo mini plug
Signal cord
(not supplied)
Turntable (with built-in equalizer)
(not supplied)
AC IN
Power cord
RD-MD5(B)-e.fm Page 4 Wednesday, December 2, 1998 11:40 AM