Filter
Top Products
15
Track Marking for Tuner/AUX Re-
cording ———————————————
• Whenever no sound at the playback side continues for 3 or
more seconds, the track number at the MD side is automati-
cally increased by 1.
• The track number at the MD side is automatically increased by
1 by pressing the SET button on the Unit at the desirable loca-
tion.
Everything on the CD goes onto the MD in the order it is on the CD,
or according to the order you have set in the program. (See page 10
for programming the CD tracks.)
■
1. Insert an MD with its label side up.
■
2. Insert a CD. (See page 9.)
■
3. Press the CD
6
button and then press the
7
button to stop the CD.
■
4. Press the MD REC button on the Unit.
The “MD REC” indicator lights up on the display and the track
number is increased by 1.
Then the digital recording from the CD to the MD starts. The
playback remaining time for the track being played and the re-
maining time of the MD appear on the display.
• After the CD Player has played the entire CD or all the pro-
grammed tracks, "UTOCwriting" appears on the display, indi-
cating that the recording is successfully completed. Then, the
MD and the CD stops.
• When the MD becomes full before the CD Player finishes play-
back, the MD stops after indicating "UTOCwriting".
One Track Recording ————————
■
1. Insert an MD with its label side up.
■
2. Play the track on the CD you wish to
record.
■
3. Press the MD REC button on the Unit.
The CD Player returns to the beginning of that track and the
track is recorded on the MD. After recording, the CD Player and
MD Player automatically stop.
Checking the Remaining Time of the
MD for CD Synchro Recording ———
You can see the recordable remaining time of the MD in Stop mode
or during the CD Synchro Recording.
In Stop mode, press the DISPLAY/CHARA. button on the Unit
or the DISPLAY button on the Remote Control. Each time you
press the button, the display changes as follows.
Total track number and total playback time for the MD
=
Remaining
time (recordable capacity) of MD (e.g. REM. 23:00)
=
Clock
=
(back
to the beginning)
During the CD Synchro Recording, press the DISPLAY/
CHARA. button on the Unit or the DISPLAY button on the Remote
Control. Each time you press the button, the display changes as fol-
lows.
Playback remaining time for the CD's track being played and the re-
maining time of the MD
=
Track number of the CD and the MD
(e.g.: CD 1>MD 19)
=
CD's track number and its playback
time
=
Clock
=
(back to the beginning)
Track Marking for CD Synchro Re-
cording ———————————————
Whenever playback advances from one track to another, the track
number at the MD side is automatically increased by 1.
CD Synchro Recording
Playback remaining time of CD
Remaining time of MD
■■
Using the MD Player (Editing)
In addition to its recording and play functions, the MD Player comes with editing functions. You can divide, join, move, or erase the recorded
tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the tracks in the MD.
Dividing tracks (DIVIDE function)
This involves adding a track mark (see Note) at some point during
the track which is to be made into the start of an additional track so
that the original track is divided into two tracks.
Joining tracks (JOIN function)
This involves erasing a track mark and turning two adjoining tracks
into one track.
DIVIDE
Track No.
Track A Track B Track C Track D
Track A Track B Track C Track D
Track A Track B Track C Track D
JOIN
Track C Track DTrack A + Track B.
Track No.
RD-MD5(B)-e.fm Page 15 Wednesday, December 2, 1998 11:40 AM