Filter
Top Products
40 KAWAI DIGITAL PIANO CE200
Function Buttons
16. DAMPER HOLD
This determines if the sound such as organ or strings should be held (on)
or gradually decayed (off) when the damper pedal is depressed.
Press the BEAT button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows “dMP” (= Damper) and on/off status. The
default is off.
Use the VALUE buttons to toggle on and off.
17. USER MEMORY / FACTORY RESET
USER MEMORY
This function allows the CE200 piano to save the user-definable settings
when the power is turned off. Once written to the memory, the saved
settings will be recalled every time you turn the power on.
The following settings can be saved.
: Sound type
: Effects/Reverb/Voicing setting
: Menu function settings
: Transpose
: Tempo, beat, and sound volume of the metronome
Press the PLAY/STOP button while holding down the TOUCH and
the TRANSPOSE buttons.
The display alternatively shows “MEM” and “uSr”.
Press the REC button to execute the save operation.
The save operation is completed when the display shows "Wrt."
When you are finished, press any one of the SOUND SELECT buttons to
exit the menu.
FACTORY RESET
This function will appear only when the user memory function has been
used. This function resets the CE200 piano to the factory settings. All
parameters you saved in “User Memory” will be reset to the factory preset
values.