Filter
Top Products
9INTRODUCTION
10. Insert the pedal connection cord that comes from Pedal
Board into the main unit’s pedal jack and fix with the clamp of
the Side Panel.
11. Turn the adjuster (installed on the bottom of the Pedal Unit)
down until it makes firm contact with the floor. If the floor is
carpeted, place a spiked furniture cup under the adjuster so that
it makes firm contact with the carpet backing. Press any pedal
with your foot. If the pedal rail flexes, lower the adjuster until
flexing is minimized.
CAUTION:
Before moving your piano, turn the adjuster up so that it clears the floor.
ATTACHING T HE HEADPHONE HOOK
1. Attach the Headphone Hook with two screws
(ø4 x 14) to the holes next to the headphone jacks.
Headphone Jacks
Screws
Headphone Hook
ø4 x 14
CAUTION:
Be sure to secure the main unit to the stand with the screws. If you fail to do so, the unit could fall
from the stand causing damage or personal injury.