Korg Trinity ProX Musical Instrument User Manual


 
13: Harmonic Chorus
30
13: Harmonic Chorus
This effect applies chorus only to higher frequencies. This can be used to apply a chorus effect to a bass
sound without making the sound thinner. You can also use this chorus block with feedback as a anger.
a
LFO frequency [Hz] 0.0220.00Hz LFO speed
Src NoneTempo Modulation source of LFO speed
Amt 20.00+20.00Hz Modulation amount of LFO speed
b Pre delay [msec] 0.050.0msec Delay from the original sound
c
Depth 0100 Depth of LFO modulation
Src NoneTempo Modulation source of the LFO modulation depth
Amt 100+100 Modulation amount of the LFO modulation depth
d High/Low Split Point 1100
Frequency split point between the low and high range
P.30
e Feedback 100+100 Feedback amount of the chorus block
P.30
f High Damp [%] 0100% Chorus block damping amount in the high range
g Low Level 0100 Output level in the low range
h High Level 0100 Output level in the high range (chorus)
i
Wet/Dry Dry, 1:9999:1, Wet Sets the balance between the effect and dry sounds.
Src NoneTempo Modulation source of effect balance
Amt 100+100 Modulation amount of effect balance
d: High/Low Split Point This parameter sets the frequency that splits the low and high range. Only the
high range will be sent to the chorus block.
e: Feedback Sets the feedback amount of the chorus block. Increasing the feedback will allow
you to use the effect as a anger.
In
Feedback
Wet / Dry
High Damp
Mono In - Mono Out
Low Level
High Level
High/Low Split Point
LFO: Triangle
Chorus/Flanger