Filter
Top Products
18
If you fail to see a link light try removing and reinserting the cable or trying
a different, known good, cable. Also, make sure that you are using the cor-
rect cable.
PING
There is a simple utility built into OS-X that tests the network connection
between two devices. The following steps outline how to use this utility.
1. In the Applications folder, double click the Terminal icon.
2. At the prompt enter ping -c 4 <IP address of your PCM92> and press
Enter. The data should appear something like this:
PING <IP address of your PCM92>: 56 data bytes
64 bytes from <IP address of your PCM92>: icmp_seq=0 ttl=62 time=1.118 ms
64 bytes from <IP address of your PCM92>: icmp_seq=1 ttl=62 time=1.093 ms
64 bytes from <IP address of your PCM92>: icmp_seq=2 ttl=62 time=1.067ms
64 bytes from <IP address of your PCM92>: icmp_seq=3 ttl=62 time=1.042ms
--- <IP address of your PCM92> ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 1.042/1.08/1.118 ms
If you get a “Reply from” response from the IP address that you were ping-
ing in a timely manner, it means that you have a valid network connection
between the two devices.
If you receive a “No route to host” or “0 packets received” message, this indi-
cates that your computer is not communicating with the device.
SySteM MeNU
The System Menu lets you adjust several settings in the PCM92. To access
the System Menu, press the Select knob while a System Preset is loaded.
The System Menu contains sub-menus and options. Sub-menus contain
options and/or more sub-menus. To enter a sub-menu, highlight it with the
Select knob and press the Select knob. Options contain values that you can
adjust (indicated by a colon followed by a value, for example, “Audio Source:
ANALOG”). To adjust an option’s value, turn the corresponding knob:
Knob A for an option on the first line, Knob B for an option on the second
line, and Knob C for an option on the third line. Press the Back button at
any time to save your changes and move one level up through the menus
and sub-menus.
AUdIo SetUP
The Audio Setup sub-menu contains the following options:
Audio Source
This is a global setting that configures the PCM92 to accept ANALOG or
AES input.
Clock Source
Select your clock source here. Choose from INTERNAL, AES, and BNC.