Filter
Top Products
26
coNtINUoUS coNtRoLLeRS
All PCM92 soft row parameters can be controlled with single, 7-bit control-
lers. Each parameter is controlled with the full controller range, regardless of
the parameter range. For example, if the controller is at the midpoint of its
range (64), the parameter will also be at the midpoint of its range no matter
what the actual number.
Continuous Controllers range from 0 to 127. If the parameter range is less
than 127, then a small controller change might not result in a parameter
update. But the entire range of the parameter can still be accurately con-
trolled. In addition, if the actual range of the parameter is greater than 127,
MIDI control might be somewhat coarse. This is most noticeable with large
delays.
When MIDI is enabled, the PCM92 automatically sends MIDI messages
through the MIDI Out port for soft row parameters and preset loads when-
ever those actions are performed via the front panel controls.
SoFt RoW PARAMeteR/MIdI cc MAP
Soft Row Parameter MIDI CC
Parameter #1 CC 48
Parameter #2 CC 49
Parameter #3 CC 50
Parameter #4 CC 51
Parameter #5 CC 52
Parameter #6 CC 53
Parameter #7 CC 54
Parameter #8 CC 55
bANK/PReSet MAP
User Bank Type Presets MIDI Bank #
Internal
Mono
1 Mono User Presets 0-127 72
2 Mono User Presets 128-255 73
Stereo
1 Stereo User Presets 0-127 74
2 Stereo User Presets 128-255 75
System
1 System User Presets 0-127 76
2 System User Presets 128-255 77