Filter
Top Products
20
MAchINe coNFIG
The Machine Config menu lets you configure the PCM92 processor as one,
two, three, or four virtual machines in a new preset. Note that once you’ve
selected a configuration, you must then populate each virtual machine with a
Machine Preset (see page 11 for more information).
Choices include:
Single Mono In Stereo Out
Single Stereo
Dual Mono
Cascade Stereo
Cascade Mono
Cascade Mono to Stereo
Combined Stereo Mono In
For more detailed descriptions of each configuration, see page 14.
MIdI coNtRoL
The MIDI Control sub-menu lets you adjust the following MIDI-related
options:
MIDI
Turns MIDI processing on or off.
Device ID
Select the connected MIDI device’s ID here. Choose from 0-126.
Base Channel
Select the connected MIDI device’s base channel here. Choose from 0-15.
Machine 1-4
Select each virtual machine’s channel here. Choose from 0-15.
Bank Dump
Lets you copy an entire bank of presets from the PCM92 to another
device via MIDI. (For a map of banks and presets, see page 26; to see
the current preset’s bank number, press Knob C while viewing the Preset
screen.) When Bank Dump is highlighted, turn the corresponding B or C
Knob to select a bank. Press the corresponding B or C Knob to send the
bank to the connected device.
teMPo coNtRoL
The Tempo Control sub-menu contains the following options:
Tempo Value
Set the current preset’s tempo here by turning Knob A, or by pressing the
Tap Tempo button at least two times.
Tempo Beat
Tempo is expressed in BPM. This control allows you to specify the value
of the beat. Eighth, quarter, and half note values are available. If, for exam-
ple, the rate is 120 BPM, and you select eighth-note here, the tempo will
be 120 eighth-notes per minute. If you select quarter-note here, the tempo
will be 120 quarter-notes per minute. (The factory default is quarter-note.)