Filter
Top Products
Mackie TT24 Digital Live Console Quickstart Guide TT24 Interface
14
2.3 V
-
Pot Control Area
The buttons to the right of the channel faders (Figure 2-2) selects the current
function for the channel V
-
Pots from the following
:
• PAN
:
Left/Right and LCR panning control
• TRIM
:
Digital Trim has a range of ±15 dB
• METERS
:
High
-
resolution channel metering. Push the V
-
Pot and the
meter reverses to display compressor gain reduction. Rotate the knob to
control the threshold settings.
• HPF
:
Push the V
-
Pot to engage/disengage the HPF
;
rotate the knob to ad-
just frequency between 20–400 Hz.
• AUX SENDS 1–12
:
Rotate the V
-
Pot to control send level
;
push the V
-
Pot
to toggle pre/post fader for that send.
• AUX PAN
:
Control panning of stereo linked axes
• AUX MODE
:
Aux mode is the only blue button on the console and effectively
turns the TT24 into a powerful, dedicated monitor mixer by providing aux
mixing on the faders. In this mode, the 24 channel faders act as channel aux
sends and the 4 group faders act as auxiliary master sends.
2.4 QuickMix Area
The upper
-
right of the console, below the 5.5
-
inch Touchscreen, is called the
QuickMix area (Figure 2-3). It consists of 12 push
-
button rotary encoders and
eight buttons, which provide fast navigation of the QuickMix section
It is important to note
:
• The only adjustable controls on the Touchscreen are buttons that toggle a
value on/off. All knobs represented on the Touchscreen are controlled by
corresponding QuickMix knobs. If any of the 12 knobs are missing from the
Touchscreen, the corresponding QuickMix knob has no function.
• Any Touchscreen knob colored white instead of black denotes a dual func-
tion available by pushing the corresponding QuickMix knob
.
This function
varies with the control.