Filter
Top Products
Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial
27
3.5 Effects
Four effects processors can each use one of the following effects
:
reverb, reverb
through gate, mono/stereo/ping pong delay, chorus, and flange. The default
effect sends are Aux sends 9–12 but any Aux or Matrix sends can be used. The
effect returns are on the Returns bank.
1. Press the ANLG bank button.
2. Press AUX SENDS 9 in the V
-
POT CONTROL area.
3. Turn channel 1’s V
-
Pot to 3:00 to send channel 1 to Aux 9.
4. Press the EFX button in the QuickMix area.
The INTERNAL effects screen displays on the Touchscreen (left of
Figure 3-8).
Figure 3-8 Internal Effects and Reverb screens
5. Touch the Reverb’s Edit button to edit its parameters on its own screen
(right of Figure 3-8).
6. Touch EFX IN to activate the reverb.
7. Press the RTRNS bank button.
8. Speak into the mic and increase the Returns levels (INT EFX 1L and
INT EFX 1R) until you hear sufficient reverb.