Filter
Top Products
Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial
24
Connect CD to channels 23 and 24
1. Move the CD to the channel 23 and 24 LINE connectors.
2. Set the LINE switch to the down position (line level).
3. Press and hold channel 23
and
24’s SELECT switches until the Link
Channels dialog appears in the Touchscreen.
4. Touch OK to approve the channel linking.
5. Press the PAN button in the V
-
POT CONTROL area (Figure 3-3).
6. Turn channel 23’s V
-
Pot hard left.
Channel 24 automatically pans in the opposite direction. Pretty cool!
7. Activate the SOLO button above the fader on either channel to solo.
The linked channel
does not
also solo.
8. Adjust the channel’s GAIN knob and watch the meters to the right of
the Touchscreen.
The level should be between –7 and –10 dBFS.
9. Repeat steps 7 and 8 for the other channel in the linked pair.
NOTE: Stereo linking always operates on a consecutive odd/even channel pair. The odd
channel’s parameters are copied to the even channel except Pan, which is inversely
linked (i.e., hard left on odd channel translates to hard right on even channel).
Adjust EQ, Dynamics, and channel routing
1. With channel 23 and 24 selected, press the EQ button in the QuickMix
area to display the channel EQ screen in the Touchscreen.
2. Touch the EQ IN toggle switch on the screen.
3. Use the 12 V-Pots to adjust the EQ parameters.
4. Press the DYN QuickMix button to display the Comp/Gate screen in the
Touchscreen.
5. Touch the GATE IN or COMP IN toggle switches on the Touchscreen to
engage the processors.
6. Use the 12 V-Pots to adjust the dynamics parameters.
NOTE: Press the Gate or Compressor graph on the Touchscreen to access a larger view of
the individual dynamics processors.