Filter
Top Products
LX-LNK Interconnect
Provides a high-speed connection between LX-300s. Carries command data and 32bit/48kHz digital audio
data. An optional optical transceiver module extends the maximum transmission range.
Use only Link cables from Meyer Sound. These are Fibre Channel cables that have been qualified for
high speed data use. They have a yellow label at each end that is marked "LX-Link".
Systems must be connected in a ring. The Next output of the LX-LNK module is connected to the Previous
input of the following LX-300.
Connections must be made in order of Frame ID. Frame 1 NEXT connects to Frame 2 PREVIOUS. Frame
2 NEXT connects to Frame 3 PREVIOUS, and so on.
The last LX-300 in a system must loop back to the first LX-300. Connect the NEXT output on the last LX-
300 to Frame ID 01 PREVIOUS input.
The Frame Status window on the front of the LX-300 will show green lights for Next and Previous when
the cables are properly connected to a LX-300.
Transmission Range
Up to 30m (100 feet) using copper cable.
Up to 500m (1000 feet) using multimode fiber optic cable and the optional fiber optic driver module.
Pin-outs
The link cable is a standard Fibre Channel™ cable. These have precision matched conductors. Please do not try
to build these without the required tooling and test equipment.
38
Component Specifications