Filter
Top Products
GB - 8
4. Professional built-in connection: Immediately to the car’s electronic system via system cable Po Music 100 (Optional)
• Take out your car radio according to the specifications of your car and your radio.
• Unplug the antenna plug from your radio and connect it to the female antenna socket of your Pro Music 100.
– If the car has DIN type (1), make the connection via the conversion plug (3).
– If the car has ISO type (2), make the connection directly.
– If the car has FAKRA type, make the connection via the conversion plug (4.2).
123
4.2
4.1
• Plug the male antenna plug from the Pro Music 100 into the car radio.
– If the car has DIN type (1), make the connection directly.
– If the car has ISO type (2), make the connection via the conversion plug (3).
– If the car has FAKRA type, make the connection via the conversion plug (4.1).
• Select a frequency with the 4 dip switches on the Pro Music 100. The frequency table is printed on the backside of
your Pro Music 100. Please take a close look at this frequency table!
• Connect the ISO-plug to the radio and speakers. If your car is provided with plugs other than ISO-plugs, you will
need adapters. These are not included.
• Guide the wire with the button and the 2.5 mm / 3.5 mm jack plug to the place where your audio device is located.
• Select your charging wire, for mini USB or iPod, and connect this to the Pro Music 100. Guide this wire also to the
place where your audio device is located.
• Place your Pro Music 100 in the hole behind your car radio and place your car radio back into its place.
Use with audio device
• Connect the jack plug of your Pro Music 100 to your audio device.
• Connect your charging cable to your music device when you need to charge the battery.
• Select the frequency of the Pro Music 100 on your car radio (please store this frequency as a preset).
• Press the control button on the cable of your Pro Music 100 to switch it on or off.