23
EN
2
Power Supply
Power Supply
Connecting the recorder to a PC
with the USB cable for recharge
Note
•
Stop or turn off the recorder before connecting
the USB cable.
1
Start up the PC.
2
Connect the USB cable to the USB
port on the PC.
▌
3
Connect the USB cable to the USB
terminal of the recorder.
•
The PEAK display lamp (R) lights up in
orange and recharging starts.
Battery indicator
The battery indicator on the display
changes as described below according to
the remaining battery level.
•
When [
] appears on the display,
recharge the battery as soon as possible.
When the battery runs out, [ ] and
[Battery low] are displayed and opera-
tion stops.
•
The battery indicator repeatedly appears
during recharge.