29
EN
2
Inserting and Removing the SD Card
Inserting and Removing the SD Card
2
Insert the SD card.
card is inserted all the way in.
3
Close the SD card cover.
•
After closing the SD card cover, slide
the lock switch to [LOCK].
•
When the SD card is inserted, the
recording media switching screen
appears.
Inserting the SD card
“SD” in this manual refers to SD, SDHC and
SDXC.
Commercially-available SD cards can be used
in this recorder.
1
Slide the lock switch to [OPEN]
when the recorder is stopped and
open the SD card cover.
•
Insert the SD card with the terminal
face facing up, as shown in the figure.
•
If the SD card is inserted in the wrong
direction or at an angle, the contact
face may be damaged or the SD card
may get stuck.
•
Recording cannot start unless the SD
4
To record data in the SD card,
select [Yes] by pressing the
+
or
−
button.
5
Press the
OK
button to complete
setting.
Note
•
The recording medium can be switched to the
built-in memory (
☞
p.107).
•
The recorder may not recognize an SD card
formatted (initialized) on a PC or other device. Be
sure to format your SD card on this recorder (
☞
p.113).
Terminal
surface