Omega OMB-DAQ-2416_4AO Drums User Manual


 
OMB-DAQ-2416-4AO User's Guide Installing the OMB-DAQ-2416-4AO
8
Optional components
Expansion devices that are compatible with the OMB-DAQ-2416-4AO must be ordered separately. If you
ordered any of the following products with your device, they should be included with your shipment:
OMB-AI-EXP32
Analog input expansion module adds up to 16 differential or 32 single-ended inputs to the OMB-DAQ-2416-
4AO.
Additional documentation
In addition to this hardware user's guide, you should also receive the OMB-DAQ-2416 Series Software User’s
Guide. This booklet supplies a brief description of the software you received with your OMB-DAQ-2416-4AO
and information regarding installation of that software. Please read this booklet completely before installing any
software or hardware.
Unpacking the OMB-DAQ-2416-4AO
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the OMB-DAQ-2416-4AO from its packaging, ground yourself using a wrist strap
or by simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Omega Engineering immediately by phone, fax, or e-mail.
Phone: (203) 359-1660
Fax: (203) 359-7700
Email: das@omega.com
Installing the software
Refer to the OMB-DAQ-2416 Series Software User’s Guide for instructions on installing the software on the
OMB-DAQ-2416 Series Data Acquisition Software CD. This booklet is available in PDF at
www.omega.com/manuals.
We recommend that you download the latest Windows Update onto your computer before installing and
operating the OMB-DAQ-2416-4AO.
Installing the hardware
To connect the OMB-DAQ-2416-4AO to your system, turn your computer on, and then do the following:
1. Connect the OMB-DAQ-2416-ADAP power supply to the device's external power connector, and plug the
other end into a power outlet.
2. Connect the USB cable to the device's USB connector and to a USB port on your computer. A USB2.0 port
is recommended.