Filter
Top Products
9
English
Connect
Connect your subwoofer to your SoundBar as
described in the quick start guide.
Setup
Set up your subwoofer through the setup menu.
1 Press SETUP repeatedly to select SUBW
VOL on the display panel (see ‘Setup menu
options and settings’ on page 18).
2 Press OK.
3 Press the Navigation buttons ( / ) to
change the volume.
4 Press OK to conrm.
5 Press EXIT to exit the menu.
Connectors
Connect other devices to your SoundBar.
Side left
MUSIC iLINK
Audio input from an MP3 player.
Rear left
AC MAINS~
Connect to the power supply.
MUSIC
iLINK
AC MAINS~
5 Connect your
SoundBar
This section helps you connect your SoundBar to a
TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick start
guide. For a comprehensive interactive guide, see
www.connectivityguide.philips.com.
Note
•
For identication and supply ratings, refer to
the type plate at the back or bottom of the
product.
• Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Subwoofer
Follow the steps below to position, connect, and
set up your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from either to the left or right of your
SoundBar, and ten centimeter away from the
wall.
For best results, place your subwoofer as shown
below.
EN