Filter
Top Products
DRB1474-A
En
29
Additional information
Problem Check Remedy
PRO DJ LINK does not work well. Are the player numbers properly set? Set [PLAYER No.] to [AUTO] or to a number different from the number cur-
rently set. (page 22)
Is the LAN cable properly connected? Connect the LAN cable properly to the [LINK] terminal.
Is the switching hub’s power turned on? Turn the switching hub’s power on.
Is an unnecessary device connected to the switching hub? Disconnect the unnecessary device from the switching hub.
About the liquid crystal display
Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a malfunction.
When using in cold places, the liquid crystal display may be dark for a while after the CDJ-2000’s power is turned on. It will reach the normal brightness after a while.
When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.
Error messages
When the CDJ-2000 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an error code not
indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your store of purchase or nearby Pioneer
service station.
Error code Error type Description of error Cause and action
E-7201 TOC READ ERROR TOC data cannot be read.
Disc is cracked.Replace the disc.
Disc is dirty.Clean the disc.
If operation is normal with other discs, the problem is with that disc.
E-8301
E-8302
E-8303
PLAYER ERROR Disc that cannot be played normally is loaded.
E-8304 DECODE ERROR
Music files that cannot be played normally are
loaded.
Format is wrong.Replace with music files in the proper format.
E-8305 DATA FORMAT ERROR
E-8306 NO FILE
Track recorded in the library, playlist, etc., has been
deleted from the SD memory card/
USB device and
cannot be played.
Do not delete that track from the SD memory card/
USB device.
E-9101 MECHANICAL TIME OUT
Mechanical error (time out) during loading or eject-
ing of disc.
Displayed when mechanism operation is not completed within the specified
time.
List of icons displayed on the main unit display section
Genre
Player number
(1 – 4)
Computer
Close folder
Date library
added
Artist
Cue point set in
memory
Disc
File type
Sampling rate
Album
Registered in
tag list
Label
Year
Comment
Track/
file name
Tempo (BPM)
Key
Remixer name
WAIT
Playlist
HISTORY
Hot Cue Bank
List
Color
Bit rate
Original artist
rekordbox
Rating
USB
Playing
Search
Time
SD
Open folder
DJ play count