Filter
Top Products
Connecting to Power
10
To see the words from a CDG on a TV or optional monitor,
plug one end of the supplied yellow RCA cable into
VIDEO
OUT
and the other end into your TV or monitor’s video input
jack. You can only view video from the karaoke system on
the connected TV; you cannot view video from another
optional video component.
±
±±
±
%100'%6+0)"61"219'4
When you have made all other connections, plug your
system’s power cord into a standard AC outlet.
%100'%6+0)"#0"':6'40#."52'#-'4
If you want to connect an external speaker (not supplied),
connect a speaker to the
RIGHT CHANNEL OUTPUT 8
Ω
ΩΩ
Ω
15W
jack on the back of the system. The external speaker should
have an impedance no less than 8 ohms and be able to
handle 15 watts.
%100'%6+0)"#"56'4'1"8%4
Connect a stereo VCR’s left and right audio output (AUX
OUT) to the system’s
AUX IN L
and
R
jacks.
Connect a VCR’s video out to the Karaoke’s
VIDEO IN
jack.
5+0)+0)"#.10)
1. Press
POWER
to turn on the system. The POWER
indicator lights.
2. If you play a CDG or CD, slide
FUNCTION SELECT
to
CDG/CD
.
If you play a cassette tape, slide
FUNCTION SELECT
to
TAPE
.
If you connect an optional audio component, slide
FUNCTION SELECT
to
AUX
.
±
"016'"
±
"
• If your television or optional
monitor does not have the
required video input/output jack,
you might need a radio
frequency modulator (not
supplied).
• You must change your TV or
optional monitor’s source
selection to AUX IN or VIDEO
IN when connecting your
karaoke system to an AUX IN or
VIDEO IN. Refer to your TV or
optional monitor’s instructions
manual for details.