Filter
Top Products
14
To start intro scan from the first track
, press
PLAY/PAUSE
«
««
«
.
Then press
INTRO
when the disk is stopped.
To start intro scan while a CD is playing
, press
INTRO
during
the first 10 seconds of play to start intro scan from the
current track. Press
INTRO
after the first 10 seconds of play
to start intro scan at the beginning of the next track.
The system stops after the last track is scanned. Press
INTRO
to exit intro scan. To stop scanning while a CD is
playing, press
INTRO
and the system resumes normal play
with the current track.
±
±±
±
241)4#/"2.#;
You can program the CDG/CD player to play up to 19 tracks
in any order you choose. You can program the same track
to play more than once.
1. Press
STOP
*
**
*
. The PLAY/PAUSE indicator turns off.
2. Press
PROGRAM
. The PROGRAM indicator and
&
&&
&
flash.
3. Press
SKIP
%
or
&
to select the desired track. The
selected track number and the PROGRAM indicator
flash.
4. Press
PROGRAM
to store the selected track, the
PROGRAM indicator and 0 continue flashing.
5. Repeat Steps 3 and 4 to program up to 19 tracks.
±
±±
±
6. Press
PLAY/PAUSE
«ý
«ý«ý
«ý
to play the programmed tracks.
The first track number you selected appears on the
display and the PROGRAM indicator continues to flash.
7. Program play automatically stops at the end of the last
programmed track. To stop program play sooner, press
STOP
*
**
*
. If you press
STOP
*
**
*
during programming, you
exit the programming mode, and all programmed tracks
are lost.
4GXKGYKPI14GRNCEKPI"C"
2TQITCOOGF"5GSWGPEG
1. While play is stopped, repeatedly press
PROGRAM
to
review the programmed track numbers.
2. To replace a programmed track, repeatedly press
PROGRAM
until the desired programmed track number
flashes. The PROGRAM indicator continues to flash.
±
"016'"
±
"
Intro Scan
• To exit intro scan, you must
press INTRO again, open the
CD compartment, or turn off the
karaoke system.
• You can use repeat play during
intro scan.
Program Play
• You can program up to 19
tracks. When the 19th track is
programmed,
¶ý¶ý
¶ý¶ý¶ý¶ý
¶ý¶ýflashes and
you cannot program more
tracks.
• You can use intro scan and
repeat play during program
play.