Filter
Top Products
42
Performing (Play Mode)
Here’s how to specify the current channel on which performance data from the keyboard will be transmitted.
Here’s how to change the current channel (MIDI transmit channel).
1 Use the [ ] or [ ] button to move the cursor in the display to
“MIDI CH.”
The display will indicate the current channel.
2 Use the [VALUE] knob to specify the desired channel number.
You have now specified the current channel.
Specifying the Current Channel (MIDI Transmit Channel)
MIDI Channel
What is the current channel?
The current channel is the MIDI transmit select for the keyboard and bender lever.
* Each controller can have its own separate transmit channel. However if “OMNI” is
ON, messages will be transmitted on the current channel specified for OMNI.
Here’s another way to change the current channel.
1. Hold down the [SHIFT] button and use the following buttons to enter a
numerical value.
fig.numberbutton_play.eps
Controllers [B1]–[B4], [SPLIT]/[DUAL]/
[LOWER]/[UPPER] buttons, OCTAVE [–] [+]
buttons
2. Press the [ENTER] button.
With this, the numerical value you entered
is confirmed.
What is OMNI?
If you turn OMNI on, all controllers will transmit on the current channel regardless of
their assigned MIDI transmit channel. If you want the MIDI transmit channel of the
controllers to also change when you switch the current channel, turn OMNI on as
follows.
1. Press the [ACT] button and [] button simultaneously to enter Edit
mode.
The display will indicate “LCD CONTRAST.”
2. Turn the [VALUE] knob until “SYSTEM SETTING” appears in the display.
Press the [ENTER] button.
3. Turn the [VALUE] knob until “OMNI” appears in the display.
Press the [ENTER] button.
fig.lcd-omnisw.eps
4. The display will show the current setting.
5. Use the [VALUE] knob to select “ON” or “OFF.”
6. Press the [ENTER] button.
You’ll be returned to Play mode.
Item Explanation
OMNI OFF
Messages will be transmitted using the channel and port assigned for each
controller.
OMNI ON
Messages will be transmitted using the current channel and the KEYBOARD
PORT, regardless of the channel and port assigned for each controller.
A-300_500_800C_e.book 42 ページ ２０１０年２月２２日 月曜日 午後９時１３分