Roland AT90S Musical Instrument User Manual


 
92
Chapter 3 Using the Registration Buttons
Recalling the Order that the Registrations are
Saved on the Floppy Disk (Load Next)
On the AT-90S/80S/60S, you can simply press the [Load Next] button to
successively recall registrations in the order in which they were saved on the
floppy disk. This function is called “Load Next.”
When you will be performing live, you can save registration sets to floppy
disk in the order in which you will be performing. Then while you perform,
you can recall the next registration set easily and smoothly.
1. Insert the floppy disk on which the registrations are saved
into the floppy disk drive.
2. Press the [Load Next] button.
The first registration saved on the floppy disk will be recalled into the AT-
90S/80S/60S.
The following screen appears.
fig.03-24_55
3. Press one of the registration [1]–[12] buttons (on the AT-60S,
registration [1]–[8] buttons).
The registration will be loaded (recalled into internal memory).
4. Repeat steps 2 and 3 to successively recall the registration
sets.
By using the “Disk Edit”
function, you can modify
the order or the name of the
registrations saved on disk,
or delete an unwanted
registration (p. 96).
Button Description
Undo
Return to the
registration
that had been
selected before
you pressed
the [Load Next]
button.
OK
Finalize the
registration. It
will not be pos-
sible to return
to the previous
registration.
Instead of performing step
3, you can also load the
registration by touching
<OK> in the screen.
Min
Max
Min
Max
Min
Max
Min
Max