Filter
Top Products
31
Changing Various Settings
Changing the Damper Pedal’s
Resonance
On an acoustic piano, depressing the damper pedal makes the
notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal on
the DP-900 recreates this resonance (sympathetic resonance)
when depressed.
You can select from eight levels of depth for the resonant
sound (resonance level).
This is set to “5” when the instrument is turned on.
* This setting is valid only for some piano tones. It cannot be
made for other tones.
1.
Hold down the [Reverb] button and [Split]
button, and press the [-] or [+] button.
The currently specified value will be displayed.
Larger values will produce a deeper effect.
fig.disp-reso
Making Detailed Settings
(Function)
You can make performance-related settings such as tuning
and temperament.
How to enter function mode
1.
Hold down the [Metronome] button, and press
the [Beat] button.
The indicators of the buttons you pressed will blink, and
you will enter function mode.
The display will indicate the value of the currently
selected function.
Setting the various functions
2.
Press the button to which the desired function
is assigned.
The indicator of the button you pressed will blink.
For details on each function, refer to the explanations
below.
3.
Press the [+] or [-] button to change the value.
If you press the [+] and [-] buttons simultaneously, the
value will return to the power-up default setting.
How to exit function mode
4.
Press the [Metronome] or [Beat] button.
The button’s indicator will return to the previous state.
■
Tuning to Other Instruments’
Pitches (Master Tuning)
In situations such as when playing ensemble with other
instruments, you can tune the DP-900’s reference pitch to the
pitch of another instrument. The standard pitch generally
refers to the pitch of the note that’s played when you finger
the middle A key. This tuning of all the instruments to a
standard pitch is called “tuning.”
If you press
the [Piano] button
in step 2 of “Making Detailed
Settings (Function)” (p. 31), a display like the following will
appear.
fig.disp-tune
The last three digits are indicated in the display. “440.0 Hz” is
indicated in the figure above.
Value
415.3 Hz-440.0 Hz-466.2 Hz
Power-up default setting
440.0 Hz
This setting remains in effect until you turn off the power.
Button Function Page
[Piano] Master Tuning p. 31
[E. Piano] Temperament p. 32
[Harpsichord] Stretch Tuning p. 32
[Organ] Applying the damper
pedal to the left-hand
keyboard area
p. 33
[Strings] MIDI send channel p. 35
[Variation] Local Control p. 36
[Play] Transmitting a recorded
performance
p. 36
DP-900_e.book 31 ページ ２００４年１１月２９日 月曜日 午後１２時５８分