Filter
Top Products
35
Connecting External Devices
Connection Examples
921
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the DP-900 from a MIDI sequencer/Recording
an DP-900 performance on a MIDI sequencer
fig.midi2.e
* Set Local Off if you have connected the DP-900 to a MIDI
sequencer. Refer to “Switching Local Control on and Off” (p.
36). Also set your MIDI sequencer to MIDI Thru mode (so that
messages received at MIDI IN will be re-transmitted without
change from MIDI OUT). For details, refer to the owner’s
manual of your MIDI sequencer.
Perform on the DP-900 to play a MIDI sound generator
fig.midi1.e
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
How to enter function mode
1.
Hold down the [Metronome] button and press
the [Beat] button.
The indicators of the buttons you pressed will blink, and
you will enter function mode.
The display will indicate the value of the currently
selected function.
Setting various functions
2.
Press the button to which the desired function
is assigned.
The indicator of the button you pressed will blink.
For details on the contents of each function, refer to the
explanations that follow.
3.
Press the [+] or [-] button to change the value.
If you press the [+] and [-] buttons simultaneously, the
setting will return to the original value.
How to exit function mode
4.
Press either the [Metronome] button or the
[Beat] button.
The button’s indicator will return to the previous state.
■
MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered 1-16. Simply
connecting a cable is not enough for communication to take
place. The connected devices must be set to use the same MIDI
channels. Otherwise, no sound will be produced, and no
sounds can be selected.
* The DP-900 receives all channels 1-16.
* If you are using Dual play (p. 17) or Split play (p. 18) on the
DP-900, only the channel you specify here will be transmitted.
If you press
the [Strings] button
in step 2 of “Making MIDI-
related settings,” a display like the following will appear.
fig.disp-1
Value
1-16
Power-up default setting
1
InOut
MIDI
MT Series
* MT-90s has no MIDI Out connector.
DP-900
OUTTHRU IN
MIDI
DP-900
Sound Module
DP-900_e.book 35 ページ ２００４年１１月２９日 月曜日 午後１２時５８分