Filter
Top Products
Various Settings (the Edit screens)
16
Parameter Value Explanation
6 Pad Sens
-5 – +5
(default: 0)
Adjust the pad sensitivity
This adjusts the sensitivity of each pad. For example if the pad
sensitivity value is raised, even children, whose playing strength
is less developed will be able to produce maximum volume.
In step 2 of “Basic Operation in the Edit Screens” (p. 14), strike the
pad whose setting you want to edit. After you’ve selected the
pad, use [
][ ] buttons to edit the value.
7 MIDI Note No.
Change the note number of the pad
You can change the MIDI note number of each of the HD-3’s
pads.
In step 2 of “Basic Operation in the Edit Screens” (p. 14), strike the
pad whose setting you want to edit. After you’ve selected the
pad, use [
][ ] buttons to edit the value.
OFF No note number is assigned.
0–127
The selected note number is assigned.
For the default settings of each pad, refer to “About MIDI” (p. 18).
8 MIDI X-Stick
Set the note number for cross sticking
Here you can select whether the note number that has been set
for SNARE Rim will be output, or note number 37 will be output
when the cross-stick sound is produced.
OFF (default)
Choose this setting when you only need rim shot performance
data, when using computer software, games, etc. (The note
number that has been set for SNARE Rim will always be output.)
ON
Choose this setting when sounding an external drum sound
module. (Note number 37 will be output when the cross-stick
sound is produced.)
10 Factory Reset
Resets the factory settings
Resets the HD-3 to the factory-set condition.
When “Factory Reset = OK!” appears in the display, press [
].
When “Sure?” appears, press [ ] again.
If you decide to cancel, press [
].