Filter
Top Products
Practicing
Renaming a Song
Here’s how to rename a song you’re saved.
9863
11
2
975
10
4
1. Select the song that you want to rename (p. 28).
2. While holding down the [Key Touch] button, press the [Transpose] button.
The [Key Touch] button and [Transpose] button will light, and the HP507 will enter Function mode.
3. Use the [ ] [ ] (Slow/Fast) buttons to select “Save Song.”
4. Press the [Song] button.
The media select screen will appear.
If you decide not to rename the song, press the [Metronome] button.
5. Use the [–] [+] buttons to select the save-destination media.
6. Press the [ ] (Fast) button.
A screen will appear, allowing you to select the song number of save destination.
7. Use the [–] [+] buttons to select the song number of save destination.
No song has been saved in song numbers shown as (Empty) in the song name column.
Choose a song number in which no song has been saved.
If you want to save your song by overwriting an existing song you no longer need, select the song number of that unwanted song.
8. Press the [ ] (Fast) button.
A screen will appear, allowing you to specify the song name.
9. Edit the song name using the buttons shown in the illustration below.
Use the [ ] (Fast) button to select the position at which you
want to specify a character.
Use the [–] [+] buttons to change the character.
10. Press the [Song] button to save the song.
If you decide not to rename the song, press the [Metronome] button.
When the song has been renamed, you will return to the screen of step 3.
NOTE
Never turn o the power or disconnect the USB ash drive while the screen indicates “Executing...”
11. Press the [Key Touch] button or the [Transpose] button to nish the procedure.
Select the character to changeChange the character
41
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode