Filter
Top Products
Operating the MTLC-16
20
Single Student Practice
Purpose
Allows students to practice privately.
Procedure
The controller defaults to this mode when the power is turned on and no buttons are pressed.
Details
This application is most commonly used for single student practice. However, the teacher can monitor or communicate
with any student by following the instructions for “Single and Multiple Student Monitoring and Communication.”
•
Each student hears: only his or her own instrument and microphone.
•
The teacher hears: only his or her own instrument and microphone.
Single and Multiple Student Monitoring and Communication
Purpose
Allows the teacher to listen to, talk to, or play the teacher’s instrument for selected students.
Procedure
A) Press the “Mic” button on the upper right corner of the MTLC-16 to activate the teacher’s microphone. The
LED next to the “Mic” button will light when the teacher’s microphone is activated.
B) Press a student’s number button (“1-16”) on the lower row of the MTLC-16 to monitor or communicate with
the selected student. The LED above a student’s number button will light when the student is selected.
C) Press several student number buttons to monitor or communicate with multiple students simultaneously.
Details
This application is most commonly used for monitoring or communicating with a single student while the remaining
students practice privately. However, the teacher can monitor or communicate with several students simultaneously by
selecting several student number buttons.
•
The selected student hears: the teacher’s instrument and microphone, and his or her own instrument and micro-
phone.
•
The teacher hears: the selected student’s instrument and microphone, and his or her own instrument and micro-
phone.
•
The unselected student hears: only his or her own instrument and microphone.