Filter
Top Products
2
MV-8800 Using the MV8-OP1
About the MV8-OP1
The MV8-OP1 AUDIO I/O EXPANSION (sold separately) is an expansion board that adds six analog
multi-outputs, digital inputs (coaxial type and optical type), and an R-BUS connector to the MV-8800.
Installing the MV8-OP1 adds the following functionality.
●
You can digitally connect a digital audio device (CD player, MD player, DAT recorder) and sample
without impairing the audio quality.
●
You can input digital audio of a variety of sampling frequencies.
* Since the MV8-OP1 contains a sampling rate converter, there is no limitation on the sampling frequencies that can
be input. All signals will be converted to 44.1 kHz.
●
You can connect devices that have an R-BUS connector, such as the Roland VS-2480CD or XV-5080,
for digital audio input/output via R-BUS (2-channel input / 8-channel output).
●
You can individually output the audio signals of the MV-8800 to its multi outputs. This is convenient
when you are using the MV-8800 with an external mixer. (Analog output and R-BUS output are all
available.)
●
When used with the DIF-AT24 (sold separately), an additional MIDI IN and OUT (16 channels) is added.
* Don’t connect the R-BUS connector to an RMDB connector, SCSI connector, RS-232C connector, or parallel
connector. Doing so will cause malfunctions.
* Don’t connect or disconnect the R-BUS connector while the power is turned on. Doing so will cause malfunctions.
MV-8800_b_MV8OP1_e.fm 2ページ ２００６年１２月６日 水曜日 午後１時１１分