Filter
Top Products
47
Using the SD-50 as a MIDI Sound Module
Here’s how to select a tone by category such as piano or organ, or from a group such as PRESET, GM2, or Solo.
1. Press the [PART] button a number of times to access the MIDI part screen.
page_part_meter.eps
2. Turn the [VALUE] dial to select the part whose tone you want to change.
page_part_meter.eps
3. Press the [INST] button a number of times to access the category group screen.
page_patch_grp.eps
4. Turn the [VALUE] dial to select either “CATEGORY” or “GROUP,” and then press the [ENTER]
button.
The category list or group list will appear.
page_patch_grp_list.eps
5. Turn the [VALUE] dial to select the desired category or group, and then press the [ENTER] button.
The first tone in the selected category or group will be selected.
For information on the tones in each category or group, refer to PDF “Tone List.”
page_patch_list.eps
Press the [ ] button and Sample notes will be played so you can audition the tone.
Your selection will be saved to internal memory if you save the studio set (p. 54).
Selecting by Category or Group
SD-50_e.book 47 ページ ２０１０年１月２５日 月曜日 午前１０時５２分