Filter
Top Products
11
Overview Basic Operation Adv. 1 (Kit) Adv. 2 (Phrase) Adv. 3 (Other) Appendix
Playing area
Pad Status Illumination
The LED indicators can be helpful when playing on a dark stage. See
“Illumination” (p. 52).
When using a Phrase Loop, they will show pad status (muted, erase, etc.)
Pad
Play them with sticks.
* Playing anything other than the pads can cause malfunctions.
Volume & Power
[VOLUME/PHONES] knob
p. 6
Adjusts the headphone volume.
[VOLUME/MASTER] knob
p. 6
Adjusts the volume of the OUTPUT jacks.
[POWER] button
p. 6
For turning the power on/o.
Phrase Loop area
p. 43
[STANDBY] button
p. 43
For entering Phrase Loop mode. The Setup screen appears while holding
down this button, and you can use the pads to select the number of
measures.
[PLAY]/[REC] ([STOP]) button
p. 45
These buttons switch between recording (overdubbing) and playing the
Phrase Loop. You can stop the phrase by pressing the [PLAY]/[REC] buttons
simultaneously.
[MUTE] button
p. 46
While holding down this button and hitting a pad, you can mute or un-mute the corresponding track.
Mute status is shown in the display and by the pad’s illumination.
[ERASE] button
p. 47
While holding down this button and hitting a pad, you can erase a specic portion of a track. Hit the pad at the moment you want to start
erasing, and once again when you want to stop. Erase status is shown in the display and by the pad’s illumination.
[FX CTRL] button
p. 41
Press this button to access a screen allowing you to use the knobs to control eects. While in Phrase Loop record mode, these knob
movements will be recorded.
[SET LOOP/NEXT] button
p. 47
When this button is blinking, you can set the loop point (p. 43).
When this button is lit, it is for reserving the operation (MUTE/PLAY/REC/STOP) that will occur at the beginning of the next loop (p. 47).
[V-LINK] button
p. 66
Pushing this button selects V-LINK mode, allowing you to control video devices in real time.
This button will function even when not in Phrase Loop Mode.
“PHRASE LOOP” tempo Indicator
This blinks in time with tempo. To turn this function o, see “Tempo Indicator” (p. 52).