Filter
Top Products
36
Copying a Kit
Here’s how to copy the currently selected kit.
1. Select the copy-source kit.
2. From the KIT screen, choose QUICK MENU
Ú Copy Ú Kit (p. 15).
3. Press [Button 3] (OK) to copy the kit.
4. Select the copy-destination kit.
5. From the KIT screen, choose QUICK MENU
Ú Paste Ú Kit.
6. Press [Button 3] (OK).
A conrmation screen appears.
7. Press [Button 3] (OK) to paste the kit.
Exchanging Pads (PAD EXCHANGE)
Here’s how to exchange the settings of two pads. You can also exchange pads between kits.
1. From the KIT screen (or the INST screen, etc.), choose QUICK MENU Ú Pad Exchange (p. 15).
The PAD EXCHANGE screen appears.
2. Hit the rst pad to select it.
The selected pad will be shown in the screen, and the selected pad’s illumination will blink.
If you want to exchange pads across kits, use the [KIT] buttons to select the desired kit.
If you decide to cancel the procedure, press [Button 1] (CANCEL).
3. Hit the pad to be exchanged.
The pad settings will be exchanged.