Filter
Top Products
20
Before You Begin Playing
Restoring the Factory Settings (Factory
Reset)
This function resets all the VK-8’s settings to their factory default values.
1 Make sure that the volume is turned to the minimum position.
2 Press the lower portion of the VK-8’s [POWER] switch to turn off the
power.
fig.01-07
3 While holding down the HARMONIC BAR PART [UPPER] [LOWER]
[PEDAL] buttons, press the upper portion of the [POWER] switch to turn
on the power.
4 Press the HARMONIC BAR PART [UPPER] [LOWER] [PEDAL] buttons
until all of the panel indicators light.
All settings will be restored to what they were when the instrument first left the
factory.
Once the Factory Reset has been completed, all panel indicators will light for several
seconds.
fig.01-07
NOTE
When you perform the Factory
Reset operation, all the data
you created will be lost from
the VK-8’s internal memory. If
the VK-8 contains important
data that you wish to keep, use
the Bulk Dump operation to
save the data on an external
MIDI sequencer, etc. before
you perform the Factory Reset
operation (p. 61).
NOTE
Never turn off the power
while Factory Reset is being
performed.