Filter
Top Products
44
Playing Other Tones
Assigning Organ Sounds and Other
Tones Across the Keyboard (Split)
When the Organ Voice and Other Tones are layered together, you can press the
[SPLIT] button to divide the keyboard into two zones, splitting the organ voice.
The organ voice will sound the Upper part in the right-hand zone, and the Lower
part in the left-hand zone. Other Tones will be layered with the Upper part.
1 Select a preset organ voice (p. 22), or use the harmonic bars and other
knobs and buttons to create the desired organ sound.
2 Press the [PRESET] button, extinguishing its indicator.
3 Press one of the buttons from [1] through [8] to select an Other Tone.
The selected Other Tone will sound together with the organ voice.
4 Press the [SPLIT] button.
The organ voice will be divided into upper and lower. The Other Tone will sound in
the upper area.
fig.01-43-1
❍ Playing the Other Tone in the upper, and the organ voice in the
lower part
5 Press the HARMONIC BAR PART [UPPER] button to make its indicator
light.
6 Press the harmonic bars inward until you can no longer see the numbers.
7 Get the indicators for the PERCUSSION [SECOND] button and
PERCUSSION [THIRD] button to go out (off).
The lower part of the organ voice will sound in the lower area, and only the Other
Tone will sound in the upper area.
fig.01-43-2
Organ Upper PartOrgan Lower Part
OTHER TONES
Split Point
You can change the part that
plays the Other Tones (p. 57).
Organ Lower Part
OTHER TONES
Split Point