Filter
Top Products
37
Playing the Organ
Adding Ambience (Reverb)
Reverb is an effect that adds reverberation to the sound. You can apply the reverb
effect to the organ sound and the Other Tone.
fig.01-33
1 Turn the [REVERB] knob to adjust the amount of reverb effect to be
applied.
Rotate fully right: Maximum reverberation.
Rotate fully left: No effect.
Changing the Reverb Type
By changing the reverberations of the notes, you can enjoy the atmosphere of
performance in a wide variety of different locations.
2 Press the [REVERB] button to switch the reverb types.
The reverb type will be switched each time you press the [REVERB] button.
Type Explanation
ROOM Simulates the reverberation of a room.
HALL Simulates the reverb of a large concert hall.
CHURCH Simulates the reverberation of a church.
SPRING Simulates the reverberation of a spring reverb unit (p. 35).
1 2
If the “SPRING REVERB
SHOCK” function is assigned
to the D Beam controller or the
control pedal, be aware that
excessively high reverb level
settings will produce a high-
volume impact sound. To
decrease the volume of the
impact sound, use the
[REVERB] knob to adjust the
reverb level (p. 34, p. 40).
NOTE
When the “SPRING SHOCK”
function is assigned to the D
Beam controller or the control
pedal, please be aware that
raising the reverb level
excessively will produce a
high-volume impact sound (p.
34, p. 40).