Filter
Top Products
❾ Next, you’ll input an eighth-note rest. Select an eighth note as the step time, by turning the
VALUE dial counterclockwise or pressing [DEC], then press [F6] (REST).
❿ Next you’ll enter two sixteenth notes. Select a sixteenth note as the step time, by turning the
VALUE dial counterclockwise or pressing [DEC], then press the G2 key twice.
Now you’ll enter a half-note rest. Select a half note as the step time, by turning the VALUE dial
clockwise or pressing [INC], then press [F6] (REST).
This completes the first measure. Record the second and following measures in the same way.
When you finish recording, press [STOP/PLAY].
Press [EXIT] to return to the Play display (SEQ(Song)).
Record the melody using realtime recording
Here’s how to realtime record a melody using the “PR-A:001 64voice Piano” which is assigned
to Part 1 of a Performance.
<Procedure>
❶ Press [REC] to call up the Realtime Rec Stand-by display (SEQ).
❷ Return the song to the measure 1. To do this, press [u] or [d] to move the cursor to “M,” then
turn the VALUE dial counterclockwise or press [DEC] to set 1.
❸ Press [LOOP] to turn the indicator off.
This turns off the Loop function. As repeated recording is not needed for recording a melody,
you should turn this off.
❹ Press [d] to move the cursor to “Mode,” then set the recording mode to REPLACE, by turning
the VALUE dial counterclockwise or pressing [DEC].
Select REPLACE because you won’t be mix recording.
27