Filter
Top Products
6
The XP-80 does not contain an amp or speakers. In order to hear sound, you will need to con-
nect it to a keyboard amp, audio system, or headphones. Refer to the following diagram and
connect the XP-80 to the external equipment you are using.
<Procedure>
❶ Before you make connections, make sure that power is turned off for all devices.
✳ If the power is on when you make connections, you may damage your speakers.
❷ Connect supplied AC power cable to the XP-80, and plug the other end into an AC power out-
let.
✳ On 117V models the AC cable is permanently attached to the unit.
❸ Connect audio cables and MIDI cables as shown in the diagram. If you are using headphones,
plug them into the PHONES jack. Connect pedal switches or expression pedals as necessary.
✳ In order to take full advantage of the XP-80’s performance, we recommend using a stereo
amp/speaker system, If you are using a mono system, make you connections to the MIX OUT-
PUT jack L.
✳ CONTROL PEDAL 1–4 jacks can also accommodate pedal switches.
R
o
la
n
d
R
o
la
n
d
Power outlet
Expression pedal or pedal switch
Pedal Switch
External MIDI device
Sterero headphones
Stereo set, etc. Speaker with built-in amp,
keyboard amp, etc.
OUTTHRU
IN
MIDI
1
CONTROL PEDAL
3
2
4
HOLD
AC
POWER
OUTPUT
R
PHONES
L
MIX
Connect your XP-80