Samson XM610 Music Mixer User Manual


 
16
XM610 System Set-Ups
SIGNAL FLOW
SIGNAL FLOW
SIGNAL FLOW
SIGNAL FLOW
S
A
M
S
O
N
R
2
1
S
A
M
S
O
N
R
2
1
SIGNAL FLOW
SIGNAL FLOW
SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK
TO PREVENT SHOCK DO
NOT OPEN. NO USER
SERVICABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL. TO PREVENT
CAUTION
HEATSINK MAY BE
HOT! DO NOT BLOCK
AIRFLOW OR OVER-
HEATING MAY OCCUR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SERIAL
NUMBER
F
U
S
E
FUSE
FUSE RATING
12A/250V (115V)
6A/250V (230V)
CAUTION
!
~AC INPUT
115V/230W, 50/60HZ
510W (115V)900W (230V)
USE CLASS 2 WIRING MAXIMUM LOAD IMPEDANCE 4
RIGHT
LEFT
+RIGHT
LEFT+
GROUND
OUTPUT 250W/4
SERVO 550 STUDIO AMPLIFIER
RIGHT
LEFT
BRIDGED
MONO STEREO
INPUTS
(BALANCED
10K/0dBm0)
TIP RING SLEEVE
TIP +
RING -
SLEEVE GND
This system shows the
XM610 power amp oper-
ating in MAIN/MAIN
mode, with one speaker
connected to POWER
AMP 1 and one speaker
connected to POWER
AMP 2. The MONITOR
OUT is connected to an
external power amp,
which is driving 2 moni-
tor speakers. For inputs,
two microphones are
connected to channel 1
and 2’s low-impedance
inputs, and the output of
the Bass Direct Box is
also connected to the
Low-Impedance input on
channel 4. The
Keyboards, as well as the
Lead and Rhythm Guitar
signal processors’ out-
puts, are connected to
the XM610’s line inputs.
XM610’s MONITOR OUT
connected to an external
monitor amp.