Samson XM610 Music Mixer User Manual


 
6
SELECT - Digital Effects Select Switch
The SELECT switch allows you to pick one of the 100 built-in digital effects.
Simply rotate the SELECT to choose the effect.
Effect PROGRAM List
This section identifies the ten banks of built-in DSP effects presets. The first
bank of 10 presets are designed for live performance, and the following banks
are set up in groups by the types of effects.
EFX LEVEL - Master Effect Send
The EFX LEVEL control is used to send the effect mix bus to an external effect
device connected to the AUX 2 SEND jack.
EFX ON - switch
The EFX ON control is used to turn the internal Digital Effect on and off. The
effects are by-passed when the switch is in the out position and the display
shows two dashes.
6
7
8
6
7
8
VOLUME - Tape In Level Control
This adjusts the amount of signal that is sent from the TAPE IN jacks to the
MAIN bus.
VOLUME - Aux In Control
This adjusts the amount of signal that is sent from the AUX IN jacks to the
MAIN bus.
9
10
10
9
Controls and Functions
TAPE IN AND AUX IN SECTION
This allows you to adjust the level of the signal from an external device such
as a MP3 , cassette, or CD player or from an external effect device.
FRONT PANEL CONTROLS
24 BIT DIGITAL EFFECT SECTION
The XM610 features a built-in, 24 Bit Digital Effects processor with 100 high
quality, studio grade effects like Delay, Chorus and Reverb. The following sec-
tion describes the features of the powerful on-board digital effects section.