Filter
Top Products
3
Congratulations on your purchase of the Samson XM610 powered mixer! The XM610 is a six
channel, 600 Watt powered mixer with a built-in, 24 BIT DSP (Digital Signal Processor)
effects. The XM610 will give you clean, clear sound reproduction thanks to the high quality,
low noise microphone preamps, super clean mix bus, two on-board 7-band graphic equalizers
and the high output/low distortion power amplifier. For studio quality processing, you can add
one of the 100 dazzling digital effects including Delays, Chorus and lush Reverbs to your voice
or instruments. The XM610’s ingenius Kickback enclosure allows you to tilt the unit back to
see, and operate, the controls with ease. The unit is easy to transport with its compact size
and oversized, sure-grip handle. The super-tough ABS construction ensures reliable, high
quality sound from venue-to-venue and performance-to-performance day in, and night out.
Optimized for live sound reinforcement and commercial installations, the XM610 is an ideal
mixer and power amp solution offering big sound in a compact package.
In these pages, you’ll find a detailed description of the features of the XM610 powered mixer,
as well a description of its front and rear panels, step-by-step instructions for its setup and
use, and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill
it out and mail it in so that you can receive online technical support and so we can send you
updated information about these and other Samson products in the future.
With proper care and adequate air circulation, your unit will operate trouble free for many
years. We recommend you record your serial number in the space provided below for future
reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained
before shipping your unit to Samson. Without this number, the unit will not be accepted.
Please call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number
prior to shipping your unit. Please retain the original packing materials and if possible, return
the unit in the original carton and packing materials.
Introduction