Filter
Top Products
Putting the bodypack transmitter into operation
9
Putting the bodypack transmitter into
operation
Inserting and changing the battery
For powering the transmitter, use a 1.5 V AA size battery.
Connecting the microphone
The transmitter is designed for use with Sennheiser lavalier microphones and headmics. The
power supply of these microphones is via the microphone input ³ of the transmitter.
̈ Open the battery compartment by pushing the two
catches ¶ in the direction of the arrows and open the
cover ².
̈ Insert the battery as shown in the diagram on the left.
Please observe correct polarity when inserting the
battery.
̈ Close the battery compartment.
̈ Connect the microphone to the microphone input ³ of
the transmitter.
̈ Screw down the coupling ring.
²
²
¶
³