Filter
Top Products
Using operating menu
18
Adjusting a setting
Use the multi-function switch ¾ to adjust the setting of the selected menu.
By briefly sliding the multi-function switch ¾ to the position ̆ (UP) or ̄ (DOWN), the display
jumps either forwards or backwards to the next setting.
In the “ATTEN”, “CHAN”, “TUNE” and “NAME” menu and when slid to the position
̆
(UP) or
̄
(DOWN), the multi-function switch ¾ features a “fast search” function, i.e. the display cycles
continuously. In the “TUNE” menu, the cycling of the display is continuously accelerated. The
“fast search” function allows you to get fast and easily to your desired setting.
Storing a setting
With most menus, new settings become effective immediately without having to be stored. An
exception are the “TUNE” and “CHAN” menus. With these menus, new settings only become
effective after they have been stored (“STORED” appears on the LC display panel ¿, indicating
that the setting has been stored).
Exiting the operating menu
̈ Press the multi-function switch ¾ (switch position țSET)
to
permanently store a setting. “STORED” appears on the display panel,
indicating that the setting has been stored.
The display then returns to the last edited menu.
̈ Select the “EXIT” menu to exit the operating menu and to return to
the standard display.
When in the operating menu, pressing the ON/OFF button µ
will
cancel your entry (ESC function) and return you to the standard
display with the last stored settings.
SET
DOWN
UP
¾
µ