Filter
Top Products
Stage Monitor and "House" Sound System
(See Setup 3.)
When a "house" system is to be used as the prime
sound system, the PRO MASTER can be used as the
system mixer, and also provide
a
monitor output as
OUTPUT
follows. Patch the MONITOR OUTPUT jack to the EQ
SPEAKER
MONITOR
INPUT jack. Connect the MIC OUTPUT to the house
OUTPUTS
OUTPUT
system low-impedance mic input. Connect the
SPEAKER OUTPUTS to the monitor speakers. Adjust
the MONITOR controls for the desired monitor
TO HOUSE SOUND
SYSTEM MIC INPUT
speaker level, and the graphic equalizer controls for
optimum monitor sound and minimum feedback.
Adjust the channel VOLUME and MASTER VOLUME
controls for the desired house system level. Note that
the monitor is pre-fader and adjustments to the
monitor and house systems are independent.
If
post-
fader is desired, connect the EFFECTS OUTPUT to
the EQ INPUT and adjust the
EFFECTSIREVERB and
EFFECTS SEND controls for the desired monitor level.
Now both the house and monitor systems are con-
trolled by the channel VOLUME controls. Note too that
the house system is not affected by the graphic
equalizer.
Sound Reinforcement and External Effects
Device
(See Setup
4.)
Connect the EFFECTS OUTPUT jack to the input of
the external effects device (echo, flanger, etc.), and
the effects device output to a channel
7
or 8 AUX
INPUT jack. The effects-modified signal appears at all
SPEAKER
PRO MASTER output jacks except the MONITOR
OUTPUTS
OUTPUT
I
INPUT
TO CHANNEL
7
OR
8
AUX
INPUT OUTPUT