Shure VP Microphone User Manual


 
– 12 – EnglishEnglish
Declaration of Conformity
We of
Shure Incorporated
222 Hartrey Ave.
Evanston IL 60202–3696 U.S.A.
847–866–2200
declare under our sole responsibility that the following product,
Model: VP3 Name: VP3 Receiver
was tested and found to comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, in-
cluding interference that may cause undesired operation.
Testing was completed by the following NVLAP or A2LA accredited laboratory:
D.L.S. Electronic Systems, Inc.
1250 Peterson Drive
wheeling, Illinois 60090, U.S.A.
At the test location of
D.L.S. Electronic Systems, Inc.
166 South Carter
Genoa City, Wisconsin, 53128, U.S.A.,
Test Sites Number 1 and 2
Shure Inc., Manufacturer.
Signed:
Date: June 15, 1999
Name, Title: Craig Kozokar, Senior Quality Engineer
Additional Information for this Shure Wireless System
This Shure wireless transmitter is accepted under FCC Part 74 and/or Part 90.
IMPORTANT: Licensing of Shure wireless microphone equipment is the user’s
responsibility, and licensability depends on the user’s classification and ap-
plication, and on the selected frequency. Shure urges the user to consult the ap-
propriate telecommunications authority before choosing and ordering frequencies.
Changes or modifications not expressly approved by Shure Inc. could void your au-
thority to operate this equipment.
The information on this page supersedes the corresponding information in your
Shure user’s guide.